Karakterisasi Sifat Kekuatan Tarik Komposit Laminat Partikel Cangkang Kerang Simping/E-Glass dengan Matriks Poliester

Kusairi Kusairi, Nurun Nayiroh

Abstract


The increasing number of traditional boats made from wood can cause the forest to be deforested. Besides, it also results in scarcity and an increase in the price of basic wood materials so that production costs are increasingly expensive—also, the factors of decay by mould, heating, weathering. One of the efforts that can be made in the traditional shipbuilding process is through making boats made from cheap and high-quality E-Glass fibre laminate composite boards. The purpose of this study was to determine the effect of volume composition of E-glass fibres and scallop shell particles on the tensile strength of hybrid composites. Making hybrid composites by mixing scallop shell filler, E-Glass fibre and matrix. Percentage volume fraction 0C: 0E, 10C: 20E, 15C: 15E and 20C: 10E. The results showed that the maximum tensile strength at the volume fraction of 10C: 20E was 34,2694  MPa, this result was higher than the maximum requirements set by BSN in 2006, namely 0.304 MPa. The existence of a strong bond between the fibres and the matrix can increase the tensile strength of the composite as well as the influence of the scallop shell particles which can help the matrix to accept external loads/stresses so that the composite strength increases.

Keywords


Fraksi volum filler, cangkang kerang simping, sifat mekanik, poliester, komposit hibrida.

Article Metrics

Abstract view : 509 times
PDF - 420 times

Full Text:

PDF

References


H. Boesono, “Pengaruh lama perendaman terhadap organisme penempel dan modulus elastisitas pada kayu,” Ilmu Kelaut., vol. 13, no. 3, pp. 177–180, 2008.

Mufidun, Ahmad, and Ahmad Abtokhi. “Pemanfaatan Filler Serbuk Cangkang Kerang Simping (Placuna Placenta) Dan Matriks Poliester Sebagai Bahan Dasar Pembuatan Papan Komposit,” Jurnal Neutrino, 2016, vol 9. no.1 pp. 1-7.

S. Wipranata, B. I., & Leman, “Meningkatkan Peran seni Kriya Kerang dan siput pada sektor lndustri Kreatif di lndonesia,” in Prosiding Seminar Molusca, 2009, pp. 15–19.

L. Li and C. Ortiz, “Pervasive nanoscale deformation twinning as a catalyst for efficient energy dissipation in a bioceramic armour,” Nat. Mater., vol. 13, no. 5, pp. 501–507, 2014, doi: 10.1038/nmat3920.

N. S. Jarukumjorn, Kasama, “Effect of glass fiber hybridization on properties of sisal fiber–polypropylene composites,” Compos. Part B Eng., vol. 40, no. 7, pp. 623–627, 2009.

A. Hariyanto, “Peningkatan Kekuatan Tarik Dan Impak Pada Rekayasa Dan Manufaktur Bahan Komposit Hybrid Berpenguat Serat E-Glass Dan Serat Kenaf Bermatrik Polyester Untuk Panel Interior Automotive,” J. Tek. Mesin, vol. 2005, no. 6, pp. 63–71, 2015.

R. James, M., Manoj, G. K., Mathew, C., George, E. K., & Mathew, “Modification of fiber-reinforced plastic by nanofillers,” Int. J. Eng. Innov. Technol., vol. 3, no. 4, pp. 234–240, 2013.

C. R. D. Swennen, “The Molluscs of The Southern Gulf of Thailand,” Thai Stud. Biodivers., vol. 4, pp. 141–148, 2001.

M. . Schwartz, Composite Material Handbook. Singapura: Mc Graw-Hill, 1984.

D. Ashby, M. F., & Cebon, “Materials selection in mechanical design,” Le J. Phys. IV, vol. 3, no. C7, pp. C7-1-C7-9, 1993.

R. Turnip, “Penggunaan Komposit Epoksi Berpenguat Serat Kevlar Sebagai Bahan Alternatif Mengatasi Kebocoran Pipa,” Universitas Indonesia, 2010.

P. Schreyer, “Direct Hot-pressing Makes Sintering of Near-net-shape Parts Quick and Easy,” in In CFI. Ceramic forum international, 2009, vol. 86, no. 4.

A. T. E. Saputra, “Sifat Mekanik Komposit Partikel Cangkang Kerang Darah Bermatriks Poliester Justus 108 Menggunakan Fraksi Volume 10%, 20% Dan 30%,” Universitas Sanata Dharma, 2017.

Nayan, Ahmad, and Teuku Hafli, “Analisa Stuktur Mikro Material Komposit Polimer Berpenguat Serbuk Cangkang Kerang,” Malikussaleh Journal of Mechanical Science Technology, vol. 6, no.1, pp. 15-24, 2022.

Bale, Jefri S., Yeremias M. Pell, Kristomus Boimau, and Finsensius Lelu. “Analisis Kekuatan Tarik Komposit Hybrid Berpenguat Chip Daun Gewang Dan Serat Pendek E-Glass,” LONTAR Jurnal Teknik Mesin Undana (LJTMU), vol. 7, no. 01. pp. 28-33, 2020.




DOI: http://dx.doi.org/10.23960%2Fjtaf.v10i2.2930